STANDARD MACHINES - this is found on the PCB board - ensure your settings match these so that the machine behaves in a standard way to help us assist you better. It is particularly important that the repeat hard grab dipswitch is on, otherwise it can result in severely reduced payout, as players will only get one hard grab if is off.
| BANK 1 |
| OFF |
ON |
WHAT DOES THIS PIN DO? |
|
1 |
Hard grab (VR3) either 50V if on same as VR 1 if off |
| |
2 |
Claw lowers to release prize if on |
| 3 |
|
N/A |
| 4 |
|
N/A |
| 5 |
|
N/A |
| |
6 |
A skill based win delays upcoming VR3 |
| 7 |
|
N/A |
| 8 |
|
N/A |
| BANK 2 |
| OFF |
ON |
WHAT DOES THIS PIN DO? |
| 1 |
|
N/A |
| 2 |
|
Demo music while not in play--leave off |
| 3 |
|
Prize sensor timing--leave off |
| 4 |
|
Play till you win--leave off |
| 5 |
|
N/A |
| 6 |
|
N/A |
| 7 |
7 |
Access and edit internal settings when this is on |
| 8 |
|
Demo mode--leave off |
| BANK 2 |
| OFF |
ON |
WHAT DOES THIS PIN DO? |
| 1 |
|
N/A |
| |
2 |
Retain memory of prizes won when turned off |
| 3 |
|
N/A |
| 4 |
|
Up-down motor 2000rpm or 3000rpm if off |
| 5 |
|
Lrm 1 100 rpm or 2000 rpm if on |
| |
6 |
Recurring hard grab if no win |
| 7 |
|
N/A |
| 8 |
|
Claw snaps shut in mid-air if drop button pushed-keep switch off |
